SiteOnline has the capability to insert values from fields within the meter into the alarm messages. What this means is you can insert the meter notes or satellite ID inside the alarm message to be mailed out.
The usable codes are as follows:
@Val | The unscaled / unformatted value of the point when the alarm was triggered |
@SID | Satellite ID |
@RID | Radio ID |
@CS | Connect String |
@ML | Meter Location, Adds a carriage return prior to the notes |
@MN | Meter Notes, Adds a carriage return prior to the notes |
@MT | Meter Type |
@NM | Meter Name |
For example to insert the Satellite ID in a Low Battery alarm, do as follow.
- Select the meter, go to the settings tab and select COMMUNICATION
- Enter the Satellite ID
- Click Save Changes
- Open the Point in either Analogs, Digitals, or Controls.
- Enter the message containing @SID for the Satellite ID.
- Enter the email address, and click Save Changes
- Once the alarm is triggered the alarm list in both the company and meter will show the value as follows:
- Opening the Alarm screen will show the message as follows:
- Once email is received it will also include the Satellite ID:
Note: Codes can be combined within a message.
Note: Codes will only work within High and Low messages for Analog, Digital, and Controls.